Soluble Corn Fiber Supplier

Soluble Corn Fiber Forms and Fiber Grades

The soluble corn fiber products in this range are corn-derived resistant dextrin ingredients. Their specifications center on total fiber content, physical form, pH, residual sugar or moisture, and microbiological limits. Those criteria distinguish them from ordinary digestible maltodextrin and establish the identity of each purchasing grade.

The featured range uses two forms and two minimum fiber levels. The powder grades state total fiber on a dry basis and are available at ≥90.0% and ≥70.0%. The syrup specification lists total fiber at ≥90.0% and dry matter separately at 75.0–75.4%. Keep the stated assay basis attached to each grade when comparing products or calculating a formulation trial.

Match Form and Fiber Grade to the Food Process

Liquid beverages and liquid nutrition systems can start with the syrup when liquid metering is preferable to dry-powder addition. Its dry-matter value lets the formulator account for the water entering with the ingredient instead of treating the syrup as an anhydrous solid.

Dry beverage mixes, powdered nutrition products, and premixes can start with a powder. The 90% powder delivers more fiber per unit of ingredient dry matter, while the 70% powder requires a higher addition to reach the same nominal fiber target.

Bakery, dairy, and health-food formulations may use either form, depending on the plant process. Powder gives direct control over added water; syrup can fit a process that already meters liquid ingredients.

Soluble Corn Fiber Products

90% 옥수수 저항성 덱스트린 시럽

This liquid grade supports formulations and production lines that favor liquid ingredient handling. Its published specification lists total fiber at ≥90.0% and dry matter at 75.0–75.4%; confirm the fiber assay basis before calculating a use rate.

• 모양brown-yellow to light-yellow syrup
• Total fiber≥90.0%
• Dry matter (solid substance)75.0–75.4%
• 설탕<2.0%; ash: ≤0.5%
• Water activity<0.8650; pH: 3.5–5.5
• Lead≤0.5 mg/kg; arsenic: ≤0.5 mg/kg
• 총 플레이트 수≤1,000 CFU/g; total coliform: ≤30 MPN/100 g
• Mold≤25 CFU/g; yeast: ≤25 CFU/g
• Salmonella and Staphylococcus aureusnegative

견적 요청하기제품 세부 정보

90% 옥수수 저항성 덱스트린 분말

This high-fiber powder provides at least 90.0% total fiber on a dry basis. It suits dry handling and formulations that need a concentrated fiber input without the water carried by a syrup.

• 모양white or light-yellow powder
• Taste and odormild sweetness with the product's inherent smell and no off-odor
• Total fiber on a dry basis≥90.0%
• 물≤6.0%; ash: ≤0.5%; pH: 3.5–5.5
• Lead≤0.5 mg/kg; arsenic: ≤0.5 mg/kg
• 총 플레이트 수≤1,000 CFU/g; total coliform: ≤10 CFU/g
• Mold≤25 CFU/g; yeast: ≤25 CFU/g
• Salmonella and Staphylococcus aureusnegative

견적 요청하기제품 세부 정보

70% 옥수수 저항성 덱스트린 분말

This powder provides at least 70.0% total fiber on a dry basis. It suits a dry formulation with enough ingredient and solids allowance for a higher inclusion rate than the 90% powder.

• 모양white or light-yellow powder
• Taste and odormild sweetness with the product's inherent smell and no off-odor
• Total fiber on a dry basis≥70.0%
• 물≤6.0%; ash: ≤0.5%; pH: 3.5–5.5
• Lead≤0.5 mg/kg; arsenic: ≤0.5 mg/kg
• 총 플레이트 수≤1,000 CFU/g; total coliform: ≤10 CFU/g
• Mold≤25 CFU/g; yeast: ≤25 CFU/g
• Salmonella and Staphylococcus aureusnot detected

견적 요청하기제품 세부 정보

Convert the Fiber Target into a Trial Addition

For either powder, divide the required fiber mass by the guaranteed minimum dry-basis fiber fraction. A target of 10 kg of fiber corresponds to 11.11 kg of ingredient dry matter at 90% or 14.29 kg at 70%. The 70% grade therefore requires about 28.6% more ingredient dry matter for the same nominal fiber contribution. Convert dry matter to the as-received trial weight with the actual batch moisture result.

The syrup needs a separate mass balance. Its published product table states total fiber at ≥90.0% and dry matter at 75.0–75.4%, but it does not state the fiber assay basis. Confirm that basis on the current technical specification or certificate of analysis before converting a fiber target into a syrup addition. Use the dry-matter value separately to balance formulation water and total solids.

Run the calculated addition in the complete recipe and process. Check dispersion or dissolution, texture or viscosity, color and flavor after processing, target fiber per serving, and stability over the intended shelf life.

Approve the Grade and Compare Commercial Quotes

The current technical specification defines the grade and its acceptance limits; the batch certificate of analysis shows whether a shipped lot meets them. For a U.S. food application, the approval package should also support ingredient identity, dietary-fiber labeling, allergen review, origin, manufacturing site, and any certification required for the finished product.

A comparable quote needs the exact grade, order quantity, destination, packaging requirement, required documents, and delivery target. These variables let Shandong Saigao Equipment Co., Ltd. price the same purchasing scope that your quality and operations teams evaluated.